- Home
- Firmware Update
Firmware Update
Instructions for
-
Slow Feeder Metal
-
Slow Feeder Ultra
-
Slow Feeder Pro V2
Activate Firmware Update (OTA) Mode
-
How to enter OTA Mode for Slow Feeder Metal (Wave 3 and newer), Ultra and Pro V2
- 5 quick taps on power button (see video above). Successfull connection is signaled by blinking LED.
-
How to enter OTA Mode for Slow Feeder Metal (Wave 1 & 2)
- Start with Dial Knob at 9. Turn knob down to 0, up to 9, down to 0, up to 9 and hold for 3s. Successfull connection is signaled by blinking LED.
Access Slow Feeder Device
-
Connect to Slow Feeder WIFI: CremaLoop-XXXX
Note: Be sure to have downloaded new firmware bin file before connecting to the device.
-
Insert WIFI password: cremaloop2025
-
Access firmware update portal through an browser using either cremaloop.local or http://192.168.4.1
-
*** Important Note ***
Only install CremaLoop firmware modules onto the device. Any third party firmware could potentially harm the device and shall not be installed.
Firmware Versions (Compatible to Slow Feeder Metal, Ultra and Pro V2)
-
V2.0 - Default Firmware for Slow Feeder Metal (Wave 3 and newer), Ultra and Pro V2
-
V2.1 - Update March 2026
Download Firmware: Added Low battery button LED warning (3 blinks upon startup), stronger startup kick for low dial numbers
Firmware Versions (Slow Feeder Metal: Wave 1-2 Units)
-
V1.2 - Default Firmware for Slow Feeder Metal (Wave 1-2)
-
V1.3 - Update March 2026
Download Firmware: Added Low battery button LED warning (3 blinks upon startup), stronger startup kick for low dial numbers